* Not a preferred method but possible with proper personal protection
** Brickform Refresh is not intended for use in the South Coast and Bay Area Air Quality Management Districts of California or areas where Dimethyl Carbonate is not an exempt solvent.
For a durable, high-gloss, wet-look sealer concrete sealer, choose Gem-Seal. This solvent-based sealer is made from premium, super-tough, non-yellowing acrylics. It protects against dusting, staining, and mildew, retards efflorescence, and resists freeze-thaw. Gem-Seal protects interior and exterior decorative concrete and enhances color. Spray-apply for best results.
Poly-Seal is a durable, glossy sealer that uses high quality acrylics to protect concrete against staining, mildew, and dusting. It is non-yellowing, UV-resistant, and freeze-thaw resistant. Suitable for interior and exterior applications. Spray-apply for best results.
Satin-Seal is a satin finish or “natural look” sealer for concrete. This water-based sealer protects against staining and enhances color. It is non-yellowing and suitable for interior and exterior applications. As a low-VOC, water-based sealer, it is ideal for interior applications where odor is a concern. Well suited for untextured concrete and cementitious overlays.
Protect concrete while enhancing appearance and improving safety. Safety-Seal is a solvent-based acrylic sealer that enhances color, resists staining, and comes with anti-slip additives premixed. Ideal for pool decks, patios, and other applications with frequent exposure to foot traffic and water.
Stealth Seal WB is a water-based Silicone Water Repellent made of a special hybrid of Silane and Siloxane. Stealth Seal WB provides water repellency to porous construction materials such as concrete, bricks, stone, masonry blocks, mortar and grout. It is not suitable for very low-porosity substrates such as polished stone. Once sealed, the sealer protects against oil, water, and salt intrusion.
Stealth-Seal WB Specifications
5 gal. pails
Appox. 1000 ft2 per pail
Invisible finish - Does not alter appearance of the surface
Gem-Guard SB is a penetrating solvent-based Silane/Siloxane sealer designed for decorative concrete and concrete pavers. Application of Gem-Guard SB will enhance the color and give a wet look without adding the gloss and plastic look associated with traditional film forming sealers. Once treated, the sealer protects against water and salt intrusion.
Gem Cure & Seal protects freshly placed concrete against staining while reducing moisture evaporation loss during the curing process. This leads more durable concrete that better resists cracking and freeze-thaw. All Gem Cure & Seal is non-yellowing, solvent-based, and color enhancing. Gem Cure & Seal comes in both ASTM C-309 and ASTM C-1315 compliant varieties.
Satin Cure & Seal protects freshly placed concrete against staining while reducing moisture evaporation loss during the curing process. This leads more durable concrete that better resists cracking and freeze-thaw. All Satin Cure & Seal is non-yellowing, water-based, and color enhancing. Satin Cure & Seal comes in both ASTM C-309 and ASTM C-1315 compliant varieties.
UreMax is a two-part, matte finish polyurethane coating. As a water-based product, UreMax is low odor and well-suited to interior applications. UreMax is FDA 6-101.11 compliant for Food Service applications when applied over non-textured surfaces. UreMax withstands heavy foot traffic, tire marking, graffiti, mold and mildew, and staining.
DecoPoxy is a water-based, low VOC epoxy coating formulated to protect interior concrete floors while enhancing color. DecoPoxy is a two-component product that can be applied with an airless sprayer, painters’ pad, or 1/4” to 3/8” nap roller. Apply with an airless sprayer for higher gloss and smoother finish.
Poly-Astic is a two-part, high-build, very high solids coating that does not yellow or deteriorate under UV exposure. It penetrates and adheres to concrete, protecting against oils, gasoline, acids, deicing salts, abrasion, and common household chemicals. Poly-Astic is low-odor and zero-VOC. Poly-Astic is FDA 6-101.11 compliant.
Enhance and correct color with Tinta’ Seal. Tinta' Seal mixes with Brickform solvent-based sealers to add semi-transparent color to integrally colored, stamped, and overlaid concrete surfaces. Each 16 ounce tin pack conveniently mixes in a 5 gallon pail of solvent-based sealer.
Tinta' Seal Specifications
16 oz. cans
42 standard colors
Color matching available
Compatible with Gem-Seal, Poly-Seal, and Gem Cure & Seal.
Traction Grip is a powdered additive that improves traction and slip-resistance when used in Brickform solvent-based sealers such as Gem-Seal or Poly-Seal. Traction Grip particles do not have sharp edges and it does not affect color or gloss. Excellent for patios, doorways, and pool decks.
Matte Magic is a powdered additive that reduces gloss in Brickform solvent-based sealers, including Gem-Seal and Poly-Seal. Matte Magic can easily be added on the jobsite. Add smaller amounts for less matting effect.